Show simple record

dc.contributor.authorLook, Morgan
dc.contributor.authorHolmes, Wayne
dc.contributor.authorSihu, D.
dc.contributor.authorLai, Anthony
dc.date.accessioned2021-01-14T20:08:53Z
dc.date.available2021-01-14T20:08:53Z
dc.date.issued2020-10-09
dc.identifier.urihttps://hdl.handle.net/10652/5043
dc.description.abstractSpectrometers are found in applications where substances are classified through analysis of relative light reflection, transmission or fluorescence, commonly used in food, medicine and lighting applications. The Hamamatsu C12880MA offers low cost and high sensitivity in a small robust package. This project successfully employs hardware features of the NXP MK20DX256 microcontroller to interface with the sensor. The sensor specifies a relatively high clock rate of 0.2 - 5.0MHz for gating spectral (video) output. Video pixels are captured with a synchronised analogue to digital converter (ADC). A start pulse initiates this process while also determining the integration time. Any jitter or relative variation between these timings will reduce the accuracy of the measurement. Interfacing at even minimum specified clock rate with low-cost microcontrollers, such as those found in popular Arduino based evaluation boards, can prove challenging. Online examples typically operate at only a fraction of the specified rate, often with little or no regard for jitter or relative timing. Making use of available on-chip peripherals, the MK20DX256 microcontroller generates accurate control signals with very little CPU intervention. The ADC conversion is triggered by these same events which in turn initiate direct memory access (DMA) for acquired data. This is currently operating at stable clock speeds of 0.2Mhz and integration times from 0.27 to 10mS, this range could be expanded with additional programming if required. As a proof of concept this project is now ready for further development into a prototype and application to related activities within the research group.en_NZ
dc.language.isoenen_NZ
dc.subjectHamamatsu C12880MAen_NZ
dc.subjectNXP MK20DX256en_NZ
dc.subjectspectrometersen_NZ
dc.subjectmicrocontrollersen_NZ
dc.subjecton-chip peripheralsen_NZ
dc.titleOn-chip peripheral control of ultra-compact spectrometeren_NZ
dc.typeConference Contribution - Oral Presentationen_NZ
dc.date.updated2020-12-11T13:30:06Z
dc.rights.holderAuthorsen_NZ
dc.subject.marsden0906 Electrical and Electronic Engineeringen_NZ
dc.identifier.bibliographicCitationLook, M., Holmes, W., Sihu, D., & Lai, A. (2020, October). On-chip peripheral control of ultra-compact spectrometer. Paper presented at the Unitec Research Symposium 2020, Unitec Mt Albert Auckland.en_NZ
unitec.publication.titleUnitec Research Symposiumen_NZ
unitec.conference.titleAnnual Unitec Research Symposium 2020en_NZ
unitec.conference.orgUnitec Institute of Technologyen_NZ
unitec.conference.locationMount Albert Campus, Auckland, New Zealanden_NZ
unitec.conference.sdate2020-10-09
unitec.conference.edate2020-10-09
unitec.peerreviewedyesen_NZ
dc.contributor.affiliationUnitec Institute of Technologyen_NZ
unitec.identifier.roms65192en_NZ
unitec.identifier.roms65288
unitec.identifier.roms65557
unitec.institution.studyareaConstruction + Engineeringen_NZ


Files in this item

Thumbnail

This item appears in

Show simple record


© Unitec Institute of Technology, Private Bag 92025, Victoria Street West, Auckland 1142