Show simple record

dc.contributor.authorShaheed, Riffat
dc.contributor.authorAzhari, C. H.
dc.contributor.authorAhsan, A.
dc.contributor.authorMohtar, W. H. M. W.
dc.description.abstractIn this paper, prospect of employing a low-tech preparation of coconut shell as activated carbon was investigated. Activated carbon was prepared from locally available coconut shell with simple, inexpensive and low-tech production process. The influence of carbonisation temperatures (i.e. 500, 600, 700 and 800°C) and residence times (i.e. 1.5 and 2 hours) of the prepared activated carbon on the percentage of yield, adsorption capacity and the development of pores were examined. The charcoal was ground to particles size ranges of 0.6-1.0, 1.0-2.36 and 2.36-4.75 mm, respectively and was activated by saturated NaCl solution for 24 hours. Results show that the carbon yield reduces with both increasing temperature and residence time, but the adsorption capacity increases up to an optimum temperature of 700°C. The pore diameter was progressively increased from the carbonisation temperatures 500 to 700°C and stabilised even at higher temperature. Increasing residence time to two hours obviously increased the pore diameter but the structural pore walls started to collapse at 700°C. It is further found that 1.0-2.36 mm particle sized activated carbon has the best adsorption capacity of 58% compared with the other particle size range. The optimum condition obtained is at carbonisation temperature of 700°C and 1.5 hours residence time. The results of the study demonstrate that the low tech process of self-prepared coconut-shell activated carbon is feasible and may be utilised for water treatment. Paper JHER0307.en_NZ
dc.publisherJournal of Hydrology and Environment Research - JHERen_NZ
dc.rights© EnviroWater Sydney, 2015en_NZ
dc.subjectactivated carbonen_NZ
dc.subjectcoconut shellen_NZ
dc.subjectpore developmenten_NZ
dc.subjectlow-tech preparationen_NZ
dc.subjectwater treatmenten_NZ
dc.titleProduction and characterisation of low-tech activated carbon from coconut shellen_NZ
dc.typeJournal Articleen_NZ
dc.subject.marsden090410 Water Treatment Processesen_NZ
dc.identifier.bibliographicCitationShaheed, R., Azhari, C H., Ahsan, A., & Mohtar, W H M W. (2015). Production and characterisation of low-tech activated carbon from coconut shell. Journal of Hydrology and Environment Research, 3(1), 6-14.en_NZ
unitec.publication.titleJournal of Hydrology and Environment Researchen_NZ
dc.contributor.affiliationUnitec Institute of Technologyen_NZ
unitec.publication.placeSydney, New South Wales, Australiaen_NZ
unitec.institution.studyareaConstruction + Engineering

Files in this item


This item appears in

Show simple record

© Unitec Institute of Technology, Private Bag 92025, Victoria Street West, Auckland 1142